BRISBANE, AUS, Jun 1, 2023 – (ACN Newswire) – Graphene Manufacturing Group Ltd. (TSXV: GMG) ("GMG" or the "Company") is pleased to release further results of Energy Savings Tests on a 4.3kw refrigeration system and Heat Transfer demonstrations on Aluminium and Copper. The results provide additional confidence in the potential benefits of THERMAL-XR(R) (TXR) in a range of applications.

ENERGY SAVINGS WHEN THERMAL-XR(R) APPLIED TO A NEW CONDENSER COIL

In their ISO-approved facilities, GMG's testing partner Supercool Asia Pacific Pty Ltd undertook two comparison tests to assess the impact of TXR in enhancing the operating efficiency of a cooling system. The equipment used in the tests was a new customised 4.3kW Refrigeration Unit with an electronic expansion valve with variability disabled (Figure 1 outlines the test room layout). The pre-TXR-treated condenser coil had an existing industry standard coating (as seen in Figure 2), on which tests were run. This condenser coil was then coated with TXR (as seen in Figure 2) and the same tests were run again.

Figure 1: Test room for both comparison tests
https://images.newsfilecorp.com/files/8082/168332_gmg_fig1_550.jpg

Figure 2: Condenser Coil Prior to THERMAL-XR(R) Coating (left) and Condenser Coil Post THERMAL-XR(R) Coating (right)
https://images.newsfilecorp.com/files/8082/168332_4404ddecd4a3fa18_002full.jpg

The first comparison test conducted was a Pull Down Test which assessed the time and energy required to reach a set temperature of 20C in the heat controlled room with an initial set temperature of 300C, controlled constant humidity level, and an outdoor temperature of 350C. This simulates a typical cold storage room with traffic subject to heat losses and required to cool down on multiple occasions to the set temperature. The quicker time to reach the set point cooling temperature, under the same conditions, highlights a reduction in energy consumption for the THERMAL-XR(R) coated condenser coil.

As seen in Table 1 the THERMAL-XR(R) coated coil resulted in 15.7% Energy Savings and a 16.1% time savings for the Pull Down test.

Table 1: Pull Downtime and energy consumed prior to and post TXR coating.
https://www.acnnewswire.com/docs/Multimedia/GMG_Table1.jpg

The second comparison test was an uninterrupted 48-hour Temperature Cycle test. This tests the impact of TXR on maintaining a constant set point temperature (for example where there is no periodic access to a cool room). The test measured the energy required over a 48-hour period to keep a cooling set temperature of 20C in a heat-controlled room with an outside temperature of 350C and controlled constant humidity level. The lower amount of energy required by the THERMAL-XR(R) coated unit, under the same conditions, highlights the energy savings.

Table 2 shows the THERMAL-XR(R) coated coil delivered 4.69% Energy Savings for the 48-hour Temperature Cycle test.

Table 2: 48 Hour Cycle Energy Test Prior to vs Post TXR Coating
https://www.acnnewswire.com/docs/Multimedia/GMG_Table2.jpg

Full test results will be available on GMG's website.

Craig Nicol, GMG's CEO summarised as follows "The Energy Savings results of THERMAL-XR(R) in an independent, third party, ISO-accredited testing laboratory with two testing methodologies is very exciting. The graphene-enhanced heat transfer properties of THERMAL-XR(R) have demonstrated that the performance of a new coil can be enhanced. This has significant potential for our targeted market of new air conditioners or Original Equipment Manufacturers (OEMs), as well as our existing target market of installed air conditioners. It also helps put into context those GMG projects where results on old equipment have achieved even higher energy savings."

HEAT TRANSFER VERIFICATION

GMG has also been working with potential industrial customers to demonstrate the potential for improved heat management through the application of TXR. As part of this demonstration programme, GMG has commissioned the University of Queensland Materials Performance Consultancy to verify a number of heat transfer demonstrations.

GMG is pleased to report that the University of Queensland Materials Performance Consultancy ("UQMP") verified that GMG's THERMAL-XR(R), demonstrations and results, when applied to Copper and Aluminium, changed the surface temperature when operating between 700C and 900C.

Copper Top Side Coating: Surface Temperature Reduction ~16%

As seen in Figure 3 GMG's THERMAL-XR(R), when applied to a Copper plate, reduces the surface temperature by ~16% when operating between 700C and 900C compared with an uncoated plate. The chart below shows the temperature differences due to GMG's THERMAL-XR(R) when applied on a Copper plate with the same heat load.

As seen in Figure 4, when the THERMAL-XR(R) coating was applied to the top side copper plate, greater heat transfer was observed away from the common heat source (compared to the panel with no coating). Furthermore, the non-coated underside of the coated panel – being the side directly exposed to the heat source – remained approximately 16% cooler than the heat-exposed side of the uncoated panel, within the temperature range of 70degrees C to 90degrees C.

Figure 3: Temperature Reduction of TXR coating vs Uncoated
https://images.newsfilecorp.com/files/8082/168332_4404ddecd4a3fa18_003full.jpg

Figure 4: GMG's demonstration of THERMAL-XR(R) coating increases heat transfer when applied to Copper.
https://images.newsfilecorp.com/files/8082/168332_4404ddecd4a3fa18_004full.jpg

Aluminium top side Coating: Surface Temperature Reduction ~15%

GMG previously reported the UQ had verified a ~ 15% reduction when TXR was applied to the top side of aluminium, compared to un-TXR coated material (please refer to press release of 20th December 2022).

Underside Coating | Aluminium and Copper: Surface Temperature Increase

In addition to these two 'top side' coating tests, GMG is also pleased to release the results of testing of GMG's THERMAL-XR(R) applied on the underside of both Aluminium and Copper (see Table 4), where the result was to see the underside of the plates increase in temperature, again following the same testing methodology.

Table 3: Temperature Increase from TXR Coating Underside.
https://www.acnnewswire.com/docs/Multimedia/GMG_Table3.jpg

Summary of All Results to Date for TXR coating of Aluminium and Copper, either top side or underside

These results, shown in Figure 5, are very encouraging in outlining the application of TXR for various heat management applications creating the potential for operating efficiency and / or energy savings.

Figure 5: Temperature Increases and Decreases with TXR on Copper and Aluminium
https://images.newsfilecorp.com/files/8082/168332_4404ddecd4a3fa18_005full.jpg

Relevance to Heat Exchangers in Air Conditioners and Industrial Applications

Copper and Aluminium are key metals used in HVAC-R equipment. This demonstration highlights that the external (top side) coating of the metal with THERMAL-XR(R) can improve heat transfer, potentially leading to Energy Savings because of reduced compressor and fan utilisation.

Figure 6
https://images.newsfilecorp.com/files/8082/168332_4404ddecd4a3fa18_006full.jpg

Relevance to Other Potential Applications

The coating of metal with THERMAL-XR(R) exposed to a heat source (Under side coating) can potentially act as a heat sink to keep heat within a requirement.

"GMG's THERMAL-XR(R)'s ability to increase and reduce heat transfer is clear in this simple demonstration with operating temperatures between 70degrees C to 90degrees C. The graphene-enhanced heat transfer properties of THERMAL-XR(R) seemingly outweigh the traditional insulating effect of coatings when cooling. GMG believes the ability to increase or reduce temperature with a simple application of the technically advanced THERMAL-XR(R) can significantly contribute to improved performance and efficiency while reducing energy demand in a wide range of applications," stated by Managing Director and CEO, Craig Nicol.

THERMAL-XR(R) powered by the GMG Graphene coating system is a unique method of improving the conductivity of heat exchange surfaces, resulting in an efficiency improvement and a potential power reduction when applied to air conditioning condenser coils or other industrial processes needing heat transfer.

The performance of existing air conditioners can also be increased with THERMAL-XR(R) process fluids (PREP and ACTIVATE) which clean and remove corrosion on the coil before applying the THERMAL-XR(R) RESTORE.

GMG is undertaking further assessments on other metals used in heat transfer applications and at various temperature settings and will publish market updates from time to time on these.

GMG is working with a number of companies globally including four recently signed distributors in Asia (announced 24th May 2023) and direct sales for the HVAC-R maintenance market. Furthermore, GMG is engaging with various companies for direct selling of THERMAL-XR(R) for industrial applications with high energy requirements, and high emissions – including oil and gas production, power generation, liquified natural gas production, mining, and mineral processing.

In addition, a number of customers are interested in the protective features of TXR graphene-enhanced coating, especially in harsh environmental conditions.

GMG's 4 critical business objectives are:

1. Produce Graphene and improve/scale the production process
2. Build Revenue from Energy Savings Products
3. Develop Next-Generation Battery
4. Develop Supply Chain, Partners & Project Execution Capability

About The University of Queensland Materials Performance (UQMP)

UQ Materials Performance was founded in 1998 and has since grown to become one of Australia's leading materials engineering consultancies. Our mission statement:

UQ Materials Performance serves the needs of society by applying research methodologies to answer technical questions. UQMP strengthens UQ research by building relationships of trust with industry partners, systematising knowledge gained in short-term projects, generating seed funding, and by direct involvement in structured research. UQMP inspires student learning by generating professional case studies which show their discipline in action.

UQMP has a dedicated team of engineers and industrial chemists with a wide range of experience and specialty skills. Our diverse and cross-disciplinary problem-solving approach also brings fresh perspectives to projects. Our team works closely together with our clients to clearly understand, define and tackle problems in a systematic yet direct manner. Our access to the world-class facilities of The University of Queensland puts us at the forefront of analytical science and engineering.

UQ Materials Performance operates out of The University of Queensland Advanced Engineering Building. We share the building with the Centre for Advanced Materials Processing and Manufacturing (AMPAM) and the School of Civil Engineering, allowing close collaboration on consulting and research projects.

About GMG

GMG is a disruptive Australian-based clean-tech company listed on the TSXV (TSXV: GMG) that produces graphene and hydrogen by cracking methane (natural gas) instead of mining graphite. By using the company's proprietary process, GMG can produce high quality, low cost, scalable, 'tuneable' and no/low contaminant graphene – enabling demonstrated cost and environmental improvements in a number of world-scale planet-friendly/clean-tech applications. Using this low input cost source of graphene, the Company is developing value-added products that target the massive energy efficiency and energy storage markets. The Company is pursuing additional opportunities for GMG Graphene, including developing next-generation batteries, collaborating with world-leading universities in Australia, and investigating the opportunity to enhance the performance of lubricant oil and performance-enhanced HVAC-R coating system.

For further information please contact:

Craig Nicol, Chief Executive Officer and Managing Director of the Company at craig.nicol@graphenemg.com, +61 415 445 223
Leo Karabelas at Focus Communications Investor Relations, leo@fcir.ca, +1 647 689 6041
www.graphenemg.com

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accept responsibility for the adequacy or accuracy of this news release.

Cautionary Note Regarding Forward-Looking Statements

This news release includes certain statements and information that may constitute forward-looking information within the meaning of applicable Canadian securities laws. Forward-looking statements relate to future events or future performance and reflect the expectations or beliefs of management of the Company regarding future events. Generally, forward-looking statements and information can be identified by the use of forward-looking terminology such as "intends", "expects" or "anticipates", or variations of such words and phrases or statements that certain actions, events or results "may", "could", "should", "would" or will "potentially" or "likely" occur. This information and these statements, referred to herein as "forward‐looking statements", are not historical facts, are made as of the date of this news release and include without limitation, the impact of THERMAL-XR(R) on heat transfer and its potential applications and expected performance, management's expectations of the effects of Thermal-XR(R), the intention of the Company to research, develop and produce certain products, and the Company's intention to engage third parties to assist in the distribution and sale of its products and statements.

Such forward-looking statements are based on a number of assumptions of management, including, without limitation, assumptions regarding the ability of the Company to achieve the expected results of its THERMAL-XR(R), that the Company will be able to research, develop and produce certain products as anticipated, and that the Company will be able to engage third parties and develop relationships to assist in the development, distribution and sale of its products. Additionally, forward-looking information involve a variety of known and unknown risks, uncertainties and other factors which may cause the actual plans, intentions, activities, results, performance or achievements of GMG to be materially different from any future plans, intentions, activities, results, performance or achievements expressed or implied by such forward-looking statements. Such risks include, without limitation: the Company will not be able to use THERMAL-XR(R) as expected or the performance, safety profile and production and maintenance requirements of the THERMAL-XR(R) coating system will not be consistent with management's expectations, the impact of Thermal-XR(R) will not be consistent with management's expectations, the Company will not be able to research, develop and produce certain products, the Company will not be successful in engaging third parties and developing relationships to assist in the development, distribution and sale its products, public health crises such as the COVID-19 pandemic may adversely impact the Company's business and the ability of the Company to develop its products, risks relating to the extent and duration of the conflict in Eastern Europe and its impact on global markets, the volatility of global capital markets, political instability, the failure of the Company to attract and retain skilled personnel, unexpected development and production challenges, unanticipated costs and the risk factors set out under the heading "Risk Factors" in the Company's annual information form dated October 18, 2022 available for review on the Company's profile at www.sedar.com.

Although management of the Company has attempted to identify important factors that could cause actual results to differ materially from those contained in forward-looking statements or forward-looking information, there may be other factors that cause results not to be as anticipated, estimated or intended. There can be no assurance that such statements will prove to be accurate, as actual results and future events could differ materially from those anticipated in such statements. Accordingly, readers should not place undue reliance on forward-looking statements and forward-looking information. Readers are cautioned that reliance on such information may not be appropriate for other purposes. The Company does not undertake to update any forward-looking statement, forward-looking information or financial out-look that are incorporated by reference herein, except in accordance with applicable securities laws. We seek safe harbor.

To view the source version of this press release, please visit https://www.newsfilecorp.com/release/168332

Copyright 2023 ACN Newswire. All rights reserved. http://www.acnnewswire.com

KUALA LUMPUR, May 30, 2023 – (ACN Newswire) – Minetech Resources Berhad, a civil engineering specialist and bituminous products manufacturer, today announced that the Company reported a 46.1% increase in revenue to RM36.9 million for the fourth quarter ended 31 March 2023 (4Q FY2023) compared with revenue of RM25.2 million in 4Q FY2022.

The Company registered a loss before tax (LBT) of RM7.2 million for 4Q FY2023 compared with LBT of RM12.1 million in 4Q FY2022. For FY2023, the Company recorded a 45.4% growth in revenue to RM124.2 million compared with RM85.4 million in FY2022 while LBT for the period under review has been halved to RM10.2 million from RM24.3 million.

For the quarter under review, the civil engineering division recorded revenue of RM23.4 million with an operating profit of RM2.3 million compared with revenue of RM14.7 million and operating profit of RM0.9 million in 4Q FY2022. The bituminous products division's revenue increased to RM8.6 million with an operating loss of RM0.2 million compared with revenue of RM5.1 million and an operating profit of RM0.5 million while the services division's revenue decreased to RM0.4 million with an operating loss of RM0.6 million compared with revenue of RM1.7 million and operating loss of RM4.8 million in 4Q FY2022.

For FY2023, the Company's adjusted EBITDA turned positive at RM0.75 million compared with adjusted negative EBITDA of RM11.2 million in FY2022.

Matt Chin, Executive Director of Minetech (Link)Matt Chin, Executive Director of Minetech, said, "The civil engineering and bituminous products businesses continue to be the significant contributors to revenue. For the civil engineering business, the much higher contribution to revenue of RM14.9 million from the Selinsing gold mine compared with RM8.9 million a year ago was due to an increase in work volume. The increase in sales of coating enamel resulted in higher revenue for the bituminous products business while the operating loss was due to one-off repair and maintenance cost."

"The services business has seen an improvement with a much-reduced operating loss despite the decrease in revenue. The lower revenue was mainly due to lower supply of manpower, storage tank maintenance services and lower number of remittance transactions."

"The Company remains focused on growing the new businesses that we have diversified into over the past three years, which includes financial technology and renewable energy (RE) that can help sustain earnings and growth over the longer-term. For the RE venture, we won a contract valued at RM36.7 million in January this year from Tesdec Hydropower Sdn Bhd for the development of a 3MW mini hydropower plant in Besut, Terengganu. We are cautiously optimistic for the Company's outlook given the better-than-expected economic growth of 5.6% in 1Q that was underpinned by broad-based growth across all sectors of the economy."

Minetech Resources Bhd: 7219 [BURSA: MINE], https://minetech.com.my/

Copyright 2023 ACN Newswire. All rights reserved. http://www.acnnewswire.com

BRISBANE, AUS, May 24, 2023 – (ACN Newswire) – Graphene Manufacturing Group Ltd. (TSXV: GMG) ("GMG" or the "Company") is pleased to announce that GMG has signed distribution agreements with four separate distributors ("Distributors") to buy GMG's THERMAL-XR(R) and resell in their respective countries in the Heating Ventilation Air Conditioning and Refrigeration (HVAC-R) markets. The Distributors are focused on the following geographical markets: Thailand, Singapore, Indonesia and South Korea.

GMG and certain of the Distributors have successfully completed several THERMAL-XR(R) HVAC-R projects in South East Asia to provide case studies that illustrate the product's local benefits and customer value proposition in these countries.

GMG's Managing Director and CEO, Craig Nicol, commented: "We are excited to be signing up our initial distributors in Asia to build revenue in Energy Savings – one of our key objectives for 2023. We look forward to continuing to work with the Distributors – each a valuable partner for the sale of THERMAL-XR(R) going forward."

Guy Outen, GMG's Chair, commented: "I am very pleased to see these first distributor agreements in Asia – they display confidence in the potential benefit of TXR to existing and new customers of our new distributor partners. I commend the GMG team led by Mark Lock the General Manager of Energy Savings and Senior Business Development Manager Arthur Yen for their leadership."

GMG's 4 critical business objectives are:
1. Produce Graphene and improve/scale production process
2. Build Revenue from Energy Savings Products
3. Develop Next-Generation Battery
4. Develop Supply Chain, Partners & Project Execution Capability

About GMG

GMG is a clean-technology company which seeks to offer energy saving and energy storage solutions, enabled by graphene, including that manufactured in-house via a proprietary production process.

GMG has developed a proprietary production process to decompose natural gas (i.e. methane) into its elements, carbon (as graphene), hydrogen and some residual hydrocarbon gases. This process produces high quality, low cost, scalable, 'tuneable' and low/no contaminant graphene suitable for use in clean-technology and other applications. The Company's present focus is to de-risk and develop commercial scale-up capabilities, and secure market applications.

In the energy savings segment, GMG has focused on graphene enhanced heating, ventilation and air conditioning ("HVAC-R") coating (or energy-saving paint), lubricants and fluids. In the energy storage segment, GMG and the University of Queensland are working collaboratively with financial support from the Australian Government to progress R&D and commercialization of graphene aluminium-ion batteries ("G+AI Batteries").

For further information, please contact:
Craig Nicol, Chief Executive Officer and Managing Director of the Company at craig.nicol@graphenemg.com, +61 415 445 223
Leo Karabelas at Focus Communications, info@fcir.ca, +1 647 689 6041

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accept responsibility for the adequacy or accuracy of this news release.

Cautionary Note Regarding Forward-Looking Statements

This news release includes certain statements and information that may constitute forward-looking information within the meaning of applicable Canadian securities laws. Forward-looking statements relate to future events or future performance and reflect the expectations or beliefs of management of the Company regarding future events. Generally, forward-looking statements and information can be identified by the use of forward-looking terminology such as "intends", "expects" or "anticipates", or variations of such words and phrases or statements that certain actions, events or results "may", "could", "should", "would" or will "potentially" or "likely" occur. This information and these statements, referred to herein as "forward‐looking statements", are not historical facts, are made as of the date of this news release and include without limitation, statements regarding the viability of completed THERMAL-XR(R) HVAC-R projects in South East Asia to serve as case studies which demonstrate the value of GMG's products, that additional distributors in Asia will enter into Distribution Agreements , the impact of the Distributor Agreements on revenue in Energy Savings, the influence of the partnerships with the Distributors on the sale of THERMAL-XR(R), and the business objectives of the Company in 2023 and beyond.

These forward‐looking statements involve numerous risks and uncertainties and actual results might differ materially from results suggested in any forward-looking statements. These risks and uncertainties include, among other things, risks related to the deployment of the Company's resources, that the case studies will not convey the benefits of the Company's products in South East Asia, that the effect of the Distributor Agreements on revenue in Energy Savings with differ from management's current expectations, that GMG's objectives in 2023 and beyond will diverge from its current objective, that no additional Distribution Agreements will be reached, and that the value of the partnerships with the Distributions will not align with management's expectations.

In making the forward-looking statements in this news release, the Company has applied several material assumptions, including without limitation, assumptions regarding the market demand for the Company's products, that case studies will demonstrate the benefits of the Company's products, that additional Distributors will enter into Distributor Agreements, that Distributors will have a direct impact on the Company's revenue in Energy Savings, and that the partnerships with the Distributors will impact the sale of THERMAL-XR(R) going forward.

Although management of the Company has attempted to identify important factors that could cause actual results to differ materially from those contained in forward-looking statements or forward-looking information, there may be other factors that cause results not to be as anticipated, estimated or intended. There can be no assurance that such statements will prove to be accurate, as actual results and future events could differ materially from those anticipated in such statements. Accordingly, readers should not place undue reliance on forward-looking statements and forward-looking information. Readers are cautioned that reliance on such information may not be appropriate for other purposes. The Company does not undertake to update any forward-looking statement, forward-looking information or financial out-look that are incorporated by reference herein, except in accordance with applicable securities laws. We seek safe harbor.

To view the source version of this press release, please visit https://www.newsfilecorp.com/release/167274

Copyright 2023 ACN Newswire. All rights reserved. http://www.acnnewswire.com

BRISBANE, AUS, May 17, 2023 – (ACN Newswire) – Graphene Manufacturing Group Ltd. (TSXV: GMG) ("GMG" or the "Company") is pleased to announce that GMG and Rio Tinto have signed a binding Joint Development Agreement ("JDA") with the goal of accelerating the development and application of GMG's Graphene Aluminium-Ion batteries in the mining and minerals industry. Rio Tinto will contribute technical and operational performance criteria and A$6 million, in exchange for preferential access rights.

Rio Tinto has put the net zero transition at the heart of its business strategy: combining investments in commodities that enable the energy transition with actions to decarbonise their operations and value chains. The JDA seeks to support the accelerated development of GMG's Graphene Aluminium-Ion Batteries for use in heavy mobile equipment and grid energy storage applications in the mining and mineral industry.

The JDA builds on the existing collaboration for Rio Tinto to explore the use of GMG's Energy Saving and Energy Storage solutions (see Company announcement on 18 May 2022). This JDA is effective immediately and is expected to last 2 years with payments spread over the term of the agreement. The JDA aims to co-develop GMG's Graphene Aluminium-Ion battery pouch cell into an initial battery pack/module proof of concept.

Rio Tinto will seek to involve Original Equipment Manufacturers (OEM), including Heavy Mobile Equipment OEMs, to work with GMG and Rio Tinto to align the battery pack development with end use requirements.

Success could see performance enhancements for Rio Tinto, including faster charging and longer-life batteries for heavy mobile equipment and grid energy storage, as well as supporting Rio Tinto's decarbonisation ambitions.

GMG will retain ownership of the intellectual property of the GMG Graphene Aluminium Ion Battery Pouch Cell and Battery Pack. On successful completion of the joint project, Rio Tinto would have the right to procure and use the batteries in their operations.

Rio Tinto Chief Scientist, Nigel Steward, said, "We are excited to expand and deepen our partnership with GMG. We both share a vision of a low-carbon future and for Rio Tinto it's a crucial time to partner with companies like GMG to accelerate battery technology and innovation. We are looking forward to continuing our collaboration and leveraging our combined expertise and resources to develop a truly green battery that has the potential to improve the way we supply and store energy."

GMG's Managing Director and CEO, Craig Nicol, commented: "We are excited to be collaborating with Rio Tinto, one of the world's largest mining companies who are committed to leveraging leading technologies for efficient and low carbon operations. The collaboration with Rio Tinto on the applications of Graphene Aluminium-Ion batteries is a key step for GMG. Together, with the existing technical and supply chain partnerships already established, this is another important step towards GMG's goal to become a major global supplier of next generation batteries as we continue to de-risk the commercial scale up of this technology."

Guy Outen, GMG's Chair, commented: "I am very pleased to further deepen our partnership with Rio Tinto. I believe the opportunity to work closely with them given their capability and drive as a large potential customer to access leading new technologies will greatly assist the potential development of our next generation Graphene Aluminium-Ion batteries. More broadly, significant customer feedback to GMG has reinforced the opportunity of the pouch cell battery format and this JDA with Rio Tinto is another example. We'll now re-prioritise our energies to developing this form of battery which should further support progress towards our aim of a commercial, large scale, highly competitive battery."

About Rio Tinto

Rio Tinto is a leading global mining and materials company. Rio Tinto operates in 35 countries and produces iron ore, copper, aluminium, critical minerals and other materials needed for the global energy transition and for people, communities, and nations to thrive. They have been mining for almost 150 years and operate with knowledge built up across generations and continents. Rio Tinto's purpose is finding better ways to provide the materials the world needs – striving for innovation and continuous improvement to produce materials with low emissions and to the right environmental, social and governance standards.

About GMG

GMG is a clean-technology company which seeks to offer energy saving and energy storage solutions, enabled by graphene, including that manufactured in-house via a proprietary production process.

GMG has developed a proprietary production process to decompose natural gas (i.e. methane) into its elements, carbon (as graphene), hydrogen and some residual hydrocarbon gases. This process produces high quality, low cost, scalable, 'tuneable' and low/no contaminant graphene suitable for use in clean-technology and other applications. The Company's present focus is to de-risk and develop commercial scale-up capabilities, and secure market applications.

In the energy savings segment, GMG has focused on graphene enhanced heating, ventilation and air conditioning ("HVAC-R") coating (or energy-saving paint), lubricants and fluids. In the energy storage segment, GMG and the University of Queensland are working collaboratively with financial support from the Australian Government to progress R&D and commercialization of graphene aluminium-ion batteries ("G+AI Batteries").

For further information, please contact:
Craig Nicol, Chief Executive Officer and Managing Director of the Company at craig.nicol@graphenemg.com, +61 415 445 223
Leo Karabelas at Focus Communications, info@fcir.ca, +1 647 689 6041

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accept responsibility for the adequacy or accuracy of this news release.

Cautionary Note Regarding Forward-Looking Statements

This news release includes certain statements and information that may constitute forward-looking information within the meaning of applicable Canadian securities laws. Forward-looking statements relate to future events or future performance and reflect the expectations or beliefs of management of the Company regarding future events. Generally, forward-looking statements and information can be identified by the use of forward-looking terminology such as "intends", "expects" or "anticipates", or variations of such words and phrases or statements that certain actions, events or results "may", "could", "should", "would" or will "potentially" or "likely" occur. This information and these statements, referred to herein as "forward‐looking statements", are not historical facts, are made as of the date of this news release and include without limitation, statements regarding Rio Tinto's contribution to the JDA and the expected benefit thereof, the impact of the JDA on the development of the Company's Graphene Aluminium-Ion Batteries, the development of GMG's pouch cell, the potential involvement of OEM, the duration of the JDA, and the benefits derived from the JDA and the partnership with Rio Tinto more generally.

These forward‐looking statements involve numerous risks and uncertainties and actual results might differ materially from results suggested in any forward-looking statements. These risks and uncertainties include, among other things, risks related to the deployment of the Company's resources, including that the JDA will not result in the benefits management expects, that the Company's products will not develop as expect, that the impact of the JDA and the partnership with Rio Tinto will differ from management's expectations, that OEM will not assist in aligning the battery pack development with equipment requirements, changes to regional and global market trends, and that the Company will be unable to research, develop and produce certain products and technologies.

In making the forward-looking statements in this news release, the Company has applied several material assumptions, including without limitation, assumptions regarding the Company's development of certain products, the market demand for the Company's products, that the JDA will benefit both the Company and Rio Tinto, that the partnership with the Company and Rio Tinto will proceed and produce the benefits expected, that OEM will assist in aligning battery pack development with equipment requirements, the duration of the JDA, the Company's ability to research, develop and test its products within anticipated timelines, and market demand for the Company's products.

Although management of the Company has attempted to identify important factors that could cause actual results to differ materially from those contained in forward-looking statements or forward-looking information, there may be other factors that cause results not to be as anticipated, estimated or intended. There can be no assurance that such statements will prove to be accurate, as actual results and future events could differ materially from those anticipated in such statements. Accordingly, readers should not place undue reliance on forward-looking statements and forward-looking information. Readers are cautioned that reliance on such information may not be appropriate for other purposes. The Company does not undertake to update any forward-looking statement, forward-looking information or financial out-look that are incorporated by reference herein, except in accordance with applicable securities laws. We seek safe harbor.

To view the source version of this press release, please visit https://www.newsfilecorp.com/release/165332

Copyright 2023 ACN Newswire. All rights reserved. http://www.acnnewswire.com